DELPHYS MP Elite+

Technical specification

Output power
80 kVA / 72 kW
100 kVA / 90 kW
120 kVA / 108 kW
160 kVA / 144 kW
200 kVA / 180 kW

Number of phases
3/3

Configuration
tower

High quality power supply

Permanent operation in VFI mode (online double conversion).
Output voltage precision under all load conditions.
High overload capability to withstand abnormal load conditions.
A very high short-circuit current capacity which facilitates the selection of protective devices for selectivity in the downstream distribution.
An isolation transformer installed on the inverter output to ensure complete galvanic isolation between DC circuit and load output. This insulation also provides a separation between the two inputs when they are supplied by different sources.
Sinusoidal ThdU output voltage < 2 % with linear loads and < 4 % with non-linear loads.

High availability

Field-proven technology.
Fault-tolerant architecture with redundancy of basic functions, such as the ventilation system.
Easy maintainability reduces MTTR thanks to pull-out sub-assemblies and front access all components.
Accurate diagnostics guarantee power supply to the load.
Cascade failure prevention for parallel systems.
Mechanical & electrical robustness for industrial environments.
Soft start capability (ramp up) of the IGBT inverter allows a good operation even with a genset.
Specifically designed to be adapted to different industrial environment: high IP protection options, high peak current capability, long back up time…

Cost-effective equipment

The “clean” IGBT rectifier allows:

These characteristics help to limit the dimensions of upstream network infrastructure.

Possibility to create new neutral system without additional losses (extra transformer required on by-pass line only).
High short-circuit capability simplifies downstream protective devices.
High power density: its small footprint saves space on your premises.
Mains connection of the rectifier requires only 3 cables (no neutral).
Battery connection to UPS requires only 2 cables.

User-friendly operation

A control panel with graphic display for more ergonomic operation.
An array of “com-slot” plug-in communication interfaces, for upgrading your operating requirements evolution.

Simplified maintenance

An advanced diagnostic system.
A remote access device connected to the remote maintenance centre.
Easy access to subassemblies and components, facilitating tests and reducing maintenance time (MTTR).

STANDARD AND OPTION FEATURES

Standard communication features

Parallel systems

Standard electrical features

Backfeed protection: detection circuit.
Standard interface:
- 3 inputs (emergency stop, generating set, battery protection),
- 4 outputs (general alarm, back-up, bypass, preventative maintenance needs).

Electrical options

EBS (Expert Battery System) (conditions apply).
ACS synchronisation system for 2n architecture.
Redundant electronic power supplies.
Hot plug option (increase the power keeping the load supplied in double conversion).
Rectifier with long backup time.

Optional mechanical equipment

Communication options

User-friendly multilingual color graphic display with touch screen.
MODBUS RTU RS485 or TCP.
PROFIBUS / PROFINET gateway.
BACnet/IP interface.
NET VISION: professional WEB/SNMP Ethernet interface for secure UPS monitoring and remote automatic shutdown.
REMOTE VIEW PRO supervision software.
IoT Gateway for Socomec cloud services and SOLIVE UPS mobile application.
Additional Com-slot.

Remote monitoring and cloud services

LINK-UPS: Remote monitoring service that allows to monitor your UPS by specialist 24 hours a day.
SOLIVE UPS: mobile app enabling the monitoring of the UPS systems from a smartphone.

Application: